CPVC Pipes →
UPVC Pipes →
Garden Pipes →
Protech CPVC Solvent Cement →
Protech Solvent Cement →
The Soil, Waste, Rain water (SWR) Drainage system is an ideal solution for sewerage applications across rural and urban areas. Owing to its superior properties over costly and unhygienic conventional drainage systems, Kasta SWR Pipes and Fittings enable fast removal of waste without blockage and leakage. And its high impact strength, chemical and corrosion resistance, durability and zero maintenance makes it cost effective than other conventional drainage systems.
One end of the pipes and fittings is plain and the other end comes with a socket. The two ends can be easily joined by applying a coat of solvent cement which ensures a strong bonding at the joint. And makes it strong enough to withstand any adverse condition. These pipes and fittings are most suitable for buried and horizontal lines.
One end of the pipe or fitting is plain and other end comes with grooved socket and a rubber ring. The two ends can be easily joined along with rubber ring with the help of rubber lubricant. This joint can withstand thermal expansion for the shaft or vertical lines. These pipes and fittings are more suitable and suggestible for shaft and vertical lines.
Due to its light weight these pipes are easy to handle and carry from one place to another, hence saves cost.
Excellent flow of fluid remains constant throughout its life due to the smooth internal surface in these pipes and fittings.
Does not support combustion, hence self-extinguishing.
Excellent outdoor weathering performance due to specially blended perfect UV stabilized compound.
Unaffected by a wide range of chemicals.
1. Used in drain and sewer line of residential & commercial complexes.
2. Soil, Waste and Rain disposal lines used in lavatories (basins, commodes etc.) and kitchens.
3. Main vent lines in drainage schemes.
4. Rain water lines connecting rooftop of residences and complexes to gullies and gutters for drainage of excess rain water.
5. Disposal of effluents.
-Ring-O-Socket/Selfit fittings (As per IS 14735-1999 with Latest Amendment): Bend, Door Bend, Tee, Y, Door Y, Double Y with door, Coupler, Reducer, Nahani Trap, P Trap, Vent Cowls, Pipe Clips, Square Jalis, W.C. Connector, Multi Floor Traps etc.
Pipes conforms to IS 13592-1992
|Nominal outside (D) mm||Tolerance on outside (D) mm||Wall Thickness Type-A (t) mm||Wall Thickness Type-B (t) m||Wall Thickness- Sufla (Non-Standard) (t) mm|
Pipes also available in more sizes of Nominal Diameter-40mm, 50mm, 63mm, 200mm, 250mm and 315mm