What Are The Advantages Of Using Suction Pipes

Depending on whom you ask, an amateur will tell you that a suction pipe is nothing more than a tube that sucks the fluid at one end and disposes it at another. But a mechanical master will assure you that it might be one of the most critical yet underrated component of a pumping operation.

Suction pipes are very crucial to an efficient pumping system for securing proper transportation of liquids. The process of suction-pumping creates a partial vacuum that draws fluid into a hollow space, which is then conveyed through suction pipes. It is essential to choose an industry-specific, high-quality suction pump and mind the calculations of sizing of the pipe and friction loss while setting a pumping system.

Uses of Suction Pipes

  1. Suction pipes are widely used in agricultural equipment for suction and delivery of freshwater and seawater. They are also used for fertilization and irrigation purposes.
  2. Food industries use special food-grade suction pipes in manufacturing units for carrying and distributing raw materials, liquids, and semi-solid ingredients. These pipes are designed to not react with food constituents they carry. These pipes are absolutely safe for handling raw components as well as ready-made food products.
  3. They are also applied in chemical manufacturing for suction and distribution of chemicals like acids, alkalis, and byproducts. The chemical suction pipes are non-corrosive and specifically designed to not react with chemicals.
  4. Oil and mining industries use temperature and pressure-resistant suction pipes to siphon crude petroleum and to transport petrochemical products.
  5. Suction pumps are also equipped to pull sludge, water, and slit from the mines. These suction pipes possess exceptional tensile strength to endure high stress.
  6.  These pipes can also be used for sewer sludge extraction, dispensing cement mixture, vapor ducting, and powder ducting.

Kasta, the leading manufacturer of suction pipes in India are renowned for long-lasting products. Kasta pipes are durable and made of non-corrosive PVC material with spiral wires embedded in order to obtain stronger suction pipes while keeping the flexibility intact. The inner walls of the Kasta suction pipes are extra smoothened. Smooth walls prevent the fluids from brushing against the wall and minimize the friction caused by the flow. There is an additional benefit to smoothened walls. When the stream doesn’t cause friction, residue does not accumulate on the inner wall. When there are no deposits on the inner walls, the pipe works efficiently for long years.

Kasta suction pipes are industry-specific and offer a wide array of usage for both domestic and commercial purposes. These pipes can be applied to conventional as well as ultra-modern pumping systems. Kasta suction pipes are suitable for agricultural use,. If you are looking for a highly enduring alternative that will work efficiently and last for years, Kasta suction pipe will serve you well.

Why You Need To Install Proper Sprinkler Pipe To Save Water

Let us understand the science behind the sprinkler system before getting into the sprinkler pipes first. A sprinkler works on the technique of spraying fluids (mainly water) in a controlled fashion similar to the rainfall with the help of a rotating nozzle on the top, joined by perpendicular pipes called laterals on the bottom controlled by valves. When water is released through these pipes, it emerges from the rotating nozzles and gets sprinkled out. This system is applied to irrigate the gardens, crop fields, and golf courses. Sprinklers are also used to put out fires in residential and commercial buildings.

The sprinklers make it possible to irrigate a large area of field using very less amount of water hence helping the environment by saving resources like water and fertilizers. It is an excellent approach to prevent overwatering and underwatering of the fields and enable an even distribution of moisture throughout the designated area. 

Sprinkler pipes are the backbone of a sprinkler system. It is extremely important to choose the right size and type of pipes for your sprinkler system because faulty pipes can make or break the entire system. If you choose a pipe with an inadequate diameter than required, it will affect the water flow by reducing the pressure and impair the performance of the sprinkler. Smaller pipes generate more friction and turbulence as the water flow struggles to move through the smaller space. On the other hand, if you pick a pipe with a larger diameter than required, it might be unable to build up enough force to squirt across the expected area of the sprinkler. A well-measured pipe creates an efficient irrigation system that exerts the exact pressure and amount of water needed by the field.

There are two types of pipes that are regularly used in the sprinkler systems. The first type is Polyethylene and the other is PVC pipe.

  1. Polyethylene pipes are usually black, flexible and are suitable for rocky soil or the climates where the soil is likely to be freezing cold. These pipes can sustain high pressures and is commonly used for residential use. They do not corrode. Polyethelene pipes are rated by the pressurerating of 2.5 kg/cm2 &6 kg/cm2.
  1. PVC pipes are the white or grey, semi-rigid pipes that work best for the warmer climates. The pipes are also long-lasting, affordable and easy to install. These are noncorrosive and resist salt build-up. It is important to protect PVC pipes from direct sunlight since UV rays harm the pipes and make them brittle over the course of time.

A word of advice from Kasta, a leading sprinkler pipes manufacturer in India that produces versatile high-quality sprinkler products is as follows.

However durable your sprinkler pipes are, it is very important to flush them regularly and treat them with mild chemicals to get rid of any salt deposits. Maintained sprinkler pipes can withstand the varying temperatures and elements quite well and the temperature of your surroundings, volume of the sprinkler, stress and water surges are the factors to be taken into consideration while choosing between the pipes.